A model of the engines used on various Mississippi river steamboats.
The engine details :
The engine is entirely machined from brass stock to prevent corrosion, and can be mounted directly to the boat hull, or to a stand as shown above.
.75 bore x 5.50 stroke
The very unusual California Cutoff valve gear
The paddle wheel is 13.5 inch diameter by 12 inches wide, made from 5 castings.
The castings are heat-treated, high grade sand castings, and are available for immediate shipment.
Machine tools required :
9 inch diameter lathe with 3 and 4 jaw chuck
Bridgeport mill or equivalent
Call for Cost of Shipping the Castings